For added security, you might be looking for some helpful driveway gate tips. Automatic gates provide much needed security for homes, ranches, and businesses. Opening by way of remote control, they keep unwanted automobiles out of your driveway. A driveway gate also makes a unique and striking appearance. Because they are not very common, these gates draw attention to themselves. They make a statement of importance, and help your home to stand out in the neighborhood.
The cost of driveway gates vary according to their size, the materials used, and the type of driveway gate openers you choose. A typical gate will cost from $1400 to $3200. Remote control driveway gate openers will add anywhere from $550 to $4500 to the project. The total cost will be $1950 to $7700.
Single panel driveway gates are the least expensive. The problem with a single panel gate is that the opening radius is much large then if you have two panels. This can be a problem for narrower gates, or if your gate needs to be placed close to the roadside. Size and style will dictate the final cost. A single panel 12 foot gate made of wrought iron will cost around $1600. The same size steel panel gate is slightly more expensive, at $1800.
There are many styles of dual panel gates. They can either swing open, or slide open. Single gates tend not to be sliding gates because of the space needed. These gates are more expensive than single panel gates. Costs start at around $2100. Because each gate is half the size of a single panel gate, they opening radius required is smaller. However, you will need clearance on both sides of the driveway
The gates typically do not include an opener kit. These are extra, and eth cost varies according to the technology used. Kits that so not use access control panels are less expensive, but not as secure. Remote controls only cost around $50. Keypad panels can be as expensive as $250. The most secure openers include an intercom systemand can be priced, on the high end, at $2000.
Other important helpful driveway gate tips include checking out your local home improvement store. They sell driveway gate kits for self-installation. Carefully measure the width of the driveway to determine the size of the gate you need. If you are going to install your own driveway gate, you need to make sure there are no pipes or power lines in the ground before you start digging. Most localities have a service where you can call 811 to find out if there are pipes or power lines in the area where you plan to dig.
If you do not feel confident installing the gate on your own, you can have it professionally installed. Some home improvement stores offer installation for a fee. There are also door and gate companies that will do the entire process for you. They will measure the driveway, assess the slope, and offer you several design options from which to choose. They will take care of ensuring no power lines are cut, and install the gate and opening mechanisms for you.
These helpful driveway gate tips are meant to assist you in safeguarding your home. If you tend to take long vacations, a driveway gate can keep burglars from masquerading as a service provider, driving up to your home, and stealing everything of value in your home. This sounds like a scene from a movie, but it happens every day. Protect yourself and your family. Installing a driveway gate will keep unwanted visitors out of your driveway and away from your home.